zdroj a doska

Farlo · Príspevok od používateľa **Farlo** » 20 feb 2009, 9:02

chcem sa spytat ak ma zdroj len 4-pin 12v atx a 8-pin 12v eps . tak sa da zapojit ten eps ako atx v doske ktora ma atx 8-pin konektor? neviem či som sa to spravne opytal ale proste či je eps rovnake ako atx

Príspevok od používateľa **brm** » 20 feb 2009, 9:12

Možno pomôže..

My power supply is an EPS12V but my motherboard has an ATX12V connector, what do I do?

The EPS12V connector is designed to be backwards compatible with the ATX12V connector. However, due to limited space on the motherboard, motherboard designers placed capacitors next the ATX12V power connector. These capacitors will obstruct the EPS12V connector and you will need to purchase an EPS12V to ATX12V conversion cable kit. The EPS12V connector is shaped to fit the ATX12V in one way only. If the EPS12V connector does not come in contact with any other motherboard components when connecting to the ATX12V, then it will work fine without any sort of conversion cables.

Farlo

brm napísal:Možno pomôže..

ak som to dobe pochopil budem si muset kupit spajaci kabel nato ?

dudo02

http://www.directron.com/24to20pin6in.html-budes potrebovat nejaku takuto redukciu.