http://slovensky.myaudioworld.com/mysupport/firmware/series-1016-dcc/

https://docs.google.com/file/d/0BxgPttaVjg4gdklzN0tINlRCZWs/edit?usp=sharing

dmesg

https://docs.google.com/file/d/0BxgPttaVjg4gdl83TFdCb0h4WWc/edit?usp=sharing

https://docs.google.com/file/d/0BxgPttaVjg4gVV9nLUNnWmtDMVk/edit?usp=sharing

https://docs.google.com/file/d/0BxgPttaVjg4gSnBsNjBScnZ5X0k/edit?usp=sharing
https://docs.google.com/file/d/0BxgPttaVjg4gZEdjTjJYQUJTT1k/edit?usp=sharing

<1>[ 5.492059] wmt.sd2.param = 0:0
<1>[ 5.495873] Default wmt.sd3.param = 0:0
<1>[ 5.500390] do not have set uboot enviroment: wmt.init.rc
<7>[ 5.505914] Registered led device: lcd-backlight
<6>[ 5.510061] usbcore: registered new interface driver usbhid
<6>[ 5.515545] usbhid: USB HID core driver
<6>[ 5.520424] log enable:FF, setting:FF
<6>[ 5.524161] logger: created 256K log 'log_main'
<6>[ 5.528718] logger: created 256K log 'log_events'
<6>[ 5.533440] logger: created 64K log 'log_radio'
<6>[ 5.538052] GPS: mt3326_gps_power: Switching GPS device on
<6>[ 5.543461] GPS: mt3326_gps_power: ignore power control: 1
<6>[ 5.548913] GPS: mt3326_gps_probe: Registering chardev
<6>[ 5.554118] GPS: mt3326_gps_probe: major: 246, minor: 0
<6>[ 5.559465] GPS: mt3326_gps_probe: Done
<6>[ 5.563251] BTHWCTL: alloc bthwctl: 245:0
<6>[ 5.567733] BTHWCTL: Bluetooth hardware control driver initialized
<6>[ 5.574718] usbcore: registered new interface driver snd-usb-audio
<6>[ 5.588430] WMT_SOC: dai_name=i2s, codec_name=vt1603
<4>[ 5.596553] wmt_pdm_init: pcm_clk_src=73500
<4>[ 5.596559]
<6>[ 5.602926] VT1602: vt1602 string not found
<6>[ 5.607548] wmt.audio.i2s = vt1603:0
<6>[ 5.615507] WMT_SOC: create WMT-HWDEP 0 success
<6>[ 5.619993] mount_thread
<6>[ 5.625106] asoc: VT1603 <-> wmt-i2s.0 mapping ok
<4>[ 5.690401] buf_area = ffde0000, buf_addr = 32810000buf_area = ffd3c000, b
uf_addr = 32814000
<6>[ 5.698569] asoc: HWDAC <-> wmt-pdm.0 mapping ok
<6>[ 5.705486] ALSA device list:
<6>[ 5.708381] #0: WMT_SOC
<4>[ 5.711731] default disable oprofile
<6>[ 5.715477] nf_conntrack version 0.5.0 (12987 buckets, 51948 max)
<6>[ 5.723649] NF_TPROXY: Transparent proxy support initialized, version 4.1.
0
<6>[ 5.730528] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 5.737621] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.742955] TCP cubic registered
<6>[ 5.746714] NET: Registered protocol family 10
<6>[ 5.751925] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.757353] IPv6 over IPv4 tunneling driver
<6>[ 5.761834] NET: Registered protocol family 17
<6>[ 5.766607] NET: Registered protocol family 15
<6>[ 5.771622] Bluetooth: RFCOMM TTY layer initialized
<6>[ 5.778068] Bluetooth: RFCOMM socket layer initialized
<6>[ 5.783324] Bluetooth: RFCOMM ver 1.11
<6>[ 5.786987] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 5.792273] Bluetooth: BNEP filters: protocol multicast
<6>[ 5.797472] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 5.805831] L2TP core driver, V2.0
<6>[ 5.809370] PPPoL2TP kernel driver, V2.0
<6>[ 5.813204] L2TP IP encapsulation support (L2TPv3)
<6>[ 5.818205] L2TP netlink interface
<6>[ 5.821558] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 5.828702] L2TP debugfs support
<6>[ 5.832419] lib80211: common routines for IEEE802.11 drivers
<7>[ 5.838542] lib80211_crypt: registered algorithm 'NULL'
<6>[ 5.838552] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t 9 rev 3
<6>[ 5.847145] ThumbEE CPU extension supported.
<5>[ 5.851866] Registering SWP/SWPB emulation handler
<6>[ 5.858031] input: kpadPower as /devices/virtual/input/input0
<4>[ 5.865118] [wmt_pm_init] id = 0x0, act = 0x1, bitmap = 0x6, ctl = 0xfe110
042, oc = 0xfe110082, od = 0xfe1100c2
<4>[ 5.875889] [wmt_pm_init] var define var_wake_en=1 var_wake_param=408001
<4>[ 5.882677] [wmt_pm_init] battery_used = 3
<6>[ 5.887464] PMC: WonderMedia Power Management driver
<4>[ 5.892537] PMC: Power button is configured as soft power
<4>[ 5.898238] [wmt_pm_init] power_on = 100 resume = 100 power_up = 100
<6>[ 5.905367] Can not find uboot env wmt.misc.param
<4>[ 5.910110] SD0 Host Clock 382812Hz
<6>[ 5.914246] Mali DRM initialize, driver name: mali_drm, version 2.1
<6>[ 5.920710] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
<4>[ 5.927980] Vt1609 touchscreen driver disabled.
<6>[ 5.934359] wmt-rtc wmt-rtc.0: setting system clock to 2013-03-06 13:51:31
UTC (1362577891)
<6>[ 5.943968] Freeing init memory: 180K
<4>[ 5.951254] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oo
m_score_adj instead.
<6>[ 6.043877] yaffs: dev is 32505866 name is "mtdblock10" rw
<6>[ 6.049288] yaffs: passed flags ""
<7>[ 6.052655] yaffs: yaffs: Attempting MTD mount of 31.10,"mtdblock10"
<7>[ 6.120439] yaffs: yaffs_read_super: is_checkpointed 1
<6>[ 6.120743] yaffs: dev is 32505868 name is "mtdblock12" rw
<6>[ 6.126153] yaffs: passed flags ""
<7>[ 6.129521] yaffs: yaffs: Attempting MTD mount of 31.12,"mtdblock12"
<7>[ 6.213933] yaffs: block 191 is bad
<7>[ 6.763771] yaffs: yaffs_read_super: is_checkpointed 0
<6>[ 6.763954] yaffs: dev is 32505867 name is "mtdblock11" rw
<6>[ 6.769369] yaffs: passed flags ""
<7>[ 6.772737] yaffs: yaffs: Attempting MTD mount of 31.11,"mtdblock11"
<7>[ 6.776632] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 6.801544] Uncor Ecc Err 0_th, on page 0x13828 fail., cur_try_time=-1
<4>[ 6.809506] Uncor Ecc Err 1_th, on page 0x13828 fail., cur_try_time=0
<4>[ 6.817395] read retry PASS cur_try_times=1
<4>[ 6.825528] Uncor Ecc Err 0_th, on page 0x13827 fail., cur_try_time=1
<4>[ 6.833413] read retry PASS cur_try_times=2
<4>[ 6.841893] Uncor Ecc Err 0_th, on page 0x1382a fail., cur_try_time=2
<4>[ 6.849840] Uncor Ecc Err 1_th, on page 0x1382a fail., cur_try_time=3
<4>[ 6.856956] read retry PASS cur_try_times=4
<4>[ 6.890837] UMP: UMP device driver loaded
<4>[ 6.934001] Mali: Mali device driver loaded
<6>[ 7.075362] [wmt-vd] WonderMedia HW decoder driver inited
<6>[ 7.084773] [wmt-lock] init ok, major=242, minor=1
<6>[ 7.097948] [wmt-vd] jdec Request IRQ 64 Ok.
<6>[ 7.102145] [wmt-vd] jdec registered major 236 minor 1
<6>[ 7.111142] [wmt-vd] mpeg2 registered major 236 minor 2
<6>[ 7.120189] [wmt-vd] mpeg4 registered major 236 minor 3
<6>[ 7.129287] [wmt-vd] divx registered major 236 minor 4
<6>[ 7.138294] [wmt-vd] h263 registered major 236 minor 8
<6>[ 7.167623] [wmt-vd] h264 registered major 236 minor 5
<6>[ 7.175695] [wmt-vd] vc1 registered major 236 minor 7
<6>[ 7.183105] [wmt-vd] rv registered major 236 minor 6
<6>[ 7.206193] [wmt-vd] vpx Request IRQ 88 Ok.
<6>[ 7.210310] [wmt-vd] vpx registered major 236 minor 9
<7>[ 7.221249] [wmt-ve] videoencoder_init: create video encoder proc
<4>[ 7.221261] start register videoencoder_driver
<4>[ 7.225967] *****NOW start videoencoder probe function!!*****
<6>[ 7.231852] [wmt-ve] veinfo.prdt_virt =0xffd00000,veinfo.prdt_phys =0x32a6
0000
<6>[ 7.238998] [wmt-ve] prob /dev/wmt-ve major 236, minor 0, prdt ffd00000/32
a60000, size 100 KB
<4>[ 7.247486] register videoencoder_driver done
<6>[ 7.251805] [wmt-ve] WonderMedia HW encoder driver inited
<6>[ 7.264022] [wmt-ve] encoder->irq_num = 87,encoder->isr = 0xbf0a62a8
<6>[ 7.270413] [wmt-ve] wmt-h264enc Request IRQ 87 Ok.
<6>[ 7.275237] [wmt-ve] wmt-h264enc registered major 236 minor 18
<4>[ 7.318073] wmt_vid_i2c_probe()
<3>[ 7.325354] WonderMedia CMOS camera register OK
<4>[ 7.657136] Uncor Ecc Err 0_th, on page 0x27ff0 fail., cur_try_time=4
<4>[ 7.665092] read retry PASS cur_try_times=5
<4>[ 7.689184] Uncor Ecc Err 0_th, on page 0x27fee fail., cur_try_time=5
<4>[ 7.697484] Uncor Ecc Err 1_th, on page 0x27fee fail., cur_try_time=6
<4>[ 7.705109] read retry PASS cur_try_times=-1
<3>[ 7.717347] init: try to config ril modem type...
<3>[ 7.721823] init: ril is not enable...Uncor Ecc Err 0_th, on page 0x2573c
fail., cur_try_time=-1
<4>[ 7.769700] Uncor Ecc Err 1_th, on page 0x2573c fail., cur_try_time=0
<4>[ 7.777596] read retry PASS cur_try_times=1
<3>[ 7.989003] init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
<3>[ 8.233007] init: cannot find '/system/etc/init.sh', disabling 'system_ini
t'
<3>[ 8.350094] android_usb: already disabled
<6>[ 8.354709] adb_bind_config
<6>[ 8.357444] usb_ep_autoconfig try to find ep1in-bulk
<6>[ 8.362447] usb_ep_autoconfig found ep1in-bulk
<6>[ 8.366953] usb_ep_autoconfig try to find ep2out-bulk
<6>[ 8.372070] usb_ep_autoconfig found ep2out-bulk
<6>[ 8.376846] udc: gri wmt_pullup()
<6>[ 8.380088] udc: gri pullup_enable()
<6>[ 8.385135] warning: `adbd' uses 32-bit capabilities (legacy support in us
e)
<6>[ 8.392382] adb_open
<6>[ 8.555107] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 8.638176] android_usb gadget: high speed config #1: android
<6>[ 8.643884] rndis ooooo 24
<6>[ 8.646556] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 8.906307] rndis xxxxx 24
<6>[ 9.350776] usbcore: registered new interface driver cdc_acm
<6>[ 9.356380] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
<6>[ 9.469677] USB Serial support registered for GSM modem (1-port)
<6>[ 9.475907] usbcore: registered new interface driver option
<6>[ 9.481418] option: v0.7.2:USB Driver for GSM modems
<1>[ 9.535094] [is_mc32x0]: Find mc3230(mCube g-sensor).
<6>[ 9.542536] input: g-sensor as /devices/virtual/input/input1
<4>[ 9.567353] offser gain = 482 474 418 528 256 688======================
<4>[ 9.567361]
<4>[ 9.567364] ft5406-touch reslx=600, resly=1024, Interrupt GP1, bit1, Rese
t GP0, bit4
<6>[ 9.768922] input: ft5406-touch as /devices/virtual/input/input2
<4>[ 9.793322] ERR:ft5x0x_i2c_rxdata_67:msg i2c read error: -5
<4>[ 9.798824] ERR:ft5x0x_read_data_157:read_data i2c_rxdata failed: -5
<1>[ 9.986959] [dump_kpad_devinfo]: =========================================
==========
<1>[ 9.994639] [dump_kpad_devinfo]: kpad id:baseboard devnum:1
<1>[ 10.000172] [dump_kpad_devinfo]: dev[0] type:rc_1
<1>[ 10.005104] [dump_kpad_devinfo]:
<1>[ 10.008390] [dump_kpad_devinfo]: key number:5
<1>[ 10.012810] [dump_kpad_devinfo]: key0:9e(158),
<1>[ 10.017152] [dump_kpad_devinfo]: key1:8b(139),
<1>[ 10.021655] [dump_kpad_devinfo]: key2:73(115),
<1>[ 10.026157] [dump_kpad_devinfo]: key3:72(114),
<1>[ 10.030666] [dump_kpad_devinfo]: key4:66(102),
<1>[ 10.035167] [dump_kpad_devinfo]:
<1>[ 10.038638] [dump_kpad_devinfo]: longkey num:0
<1>[ 10.043142] [dump_kpad_devinfo]: =========================================
==========
<6>[ 10.053519] input: keypad as /devices/virtual/input/input3
<4>[ 10.430673] fan GEIO_STOP_LOGO
<6>[ 10.433659] [Boot Animation] animation_stop
<4>[ 10.776949] [VPP] rx user pid 0x55
<4>[ 12.439302] mc_write:3--0
<4>[ 12.442012] mc_write:3--0
<4>[ 12.520929] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.527775] cmos_init_gc0308 2560 1936
<4>[ 12.626609] cmos_release()
<4>[ 12.629423] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.659689] cmos_init_yacd511 2560 1936
<4>[ 12.663553] cmos_release()
<6>[ 12.932817] [INFO] VPU Firmware Version =>
<6>[ 12.932823] product : | version : 0002.0000.00000008
<6>[ 12.932829]
<6>[ 12.947243] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 12.954723] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 13.060117] mc_write:3--5
<6>[ 13.064871] [INFO] VPU Firmware Version =>
<6>[ 13.064877] product : | version : 0002.0000.00000008
<6>[ 13.064883]
<6>[ 13.079297] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 13.086704] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 22.439434] Uncor Ecc Err 0_th, on page 0x2567e fail., cur_try_time=1
<4>[ 22.447430] Uncor Ecc Err 1_th, on page 0x2567e fail., cur_try_time=2
<4>[ 22.455322] read retry PASS cur_try_times=3
<1>[ 33.393832] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<4>[ 33.399504] skip adjust backlight at the first time
<4>[ 33.404539] mc_write:1--0
<6>[ 33.419512] request_suspend_state: wakeup (3->0) at 33849036002 (2013-03-0
6 13:51:58.986161334 UTC)
<1>[ 33.430339] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 154
<4>[ 33.440196] mc_write:1--60
<6>[ 34.008832] acc_open
<6>[ 34.011157] acc_release
<4>[ 34.303820] Uncor Ecc Err 0_th, on page 0x25800 fail., cur_try_time=3
<4>[ 34.310838] read retry PASS cur_try_times=4
<4>[ 40.754027] mc_write:3--0
<3>[ 40.778421] binder: release proc 162, transaction 90, not freed
<3>[ 40.784294] binder: release proc 162, transaction 5047, not freed
<6>[ 40.884850] yaffs: dev is 32505869 name is "mtdblock13" rw
<6>[ 40.890290] yaffs: passed flags ""
<7>[ 40.893639] yaffs: yaffs: Attempting MTD mount of 31.13,"mtdblock13"
<7>[ 41.008158] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 44.126783] Uncor Ecc Err 0_th, on page 0x27fbc fail., cur_try_time=4
<4>[ 44.275513] read retry PASS cur_try_times=5
<4>[ 44.493885] Uncor Ecc Err 0_th, on page 0x27fbe fail., cur_try_time=5
<4>[ 44.524878] Uncor Ecc Err 1_th, on page 0x27fbe fail., cur_try_time=6
<4>[ 44.533376] read retry PASS cur_try_times=-1
<4>[ 46.592229] Uncor Ecc Err 0_th, on page 0x43944 fail., cur_try_time=-1
<4>[ 46.610250] Uncor Ecc Err 1_th, on page 0x43944 fail., cur_try_time=0
<4>[ 46.630067] read retry PASS cur_try_times=1
<4>[ 46.910741] Uncor Ecc Err 0_th, on page 0x43946 fail., cur_try_time=1
<4>[ 46.918700] Uncor Ecc Err 1_th, on page 0x43946 fail., cur_try_time=2
<4>[ 46.926723] read retry PASS cur_try_times=3
<4>[ 48.368608] Uncor Ecc Err 0_th, on page 0x25900 fail., cur_try_time=3
<4>[ 48.376529] read retry PASS cur_try_times=4
<4>[ 333.801387] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=4
<4>[ 333.809262] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=5
<4>[ 333.817127] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=6
<4>[ 333.824996] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=-1
<4>[ 333.832908] read retry PASS cur_try_times=0
<4>[ 333.840808] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=0
<4>[ 333.848720] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=1
<4>[ 333.856625] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=2
<4>[ 333.864500] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=3
<4>[ 333.871615] read retry PASS cur_try_times=4
<1>[ 633.830513] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 150
<4>[ 633.836406] mc_write:1--58
<1>[ 633.846984] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 147
<4>[ 633.852891] mc_write:1--57
<1>[ 633.866863] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 144
<4>[ 633.872757] mc_write:1--56
<1>[ 633.886870] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 141
<4>[ 633.894230] mc_write:1--55
<1>[ 633.903615] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 138
<4>[ 633.909819] mc_write:1--54
<1>[ 633.920203] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 135
<4>[ 633.926096] mc_write:1--52
<1>[ 633.936835] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 132
<4>[ 633.942719] mc_write:1--51
<1>[ 633.953646] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 129
<4>[ 633.959562] mc_write:1--50
<1>[ 633.970201] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 126
<4>[ 633.976094] mc_write:1--49
<1>[ 633.986882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 123
<4>[ 633.992769] mc_write:1--48
<1>[ 634.006991] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 120
<4>[ 634.013487] mc_write:1--47
<1>[ 634.026882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 117
<4>[ 634.032772] mc_write:1--45
<1>[ 634.046842] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 114
<4>[ 634.054196] mc_write:1--44
<1>[ 634.063611] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 111
<4>[ 634.069806] mc_write:1--43
<1>[ 634.080537] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 108
<4>[ 634.086431] mc_write:1--42
<1>[ 634.096848] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 105
<4>[ 634.102729] mc_write:1--41
<1>[ 634.113656] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 102
<4>[ 634.119662] mc_write:1--40
<1>[ 634.130198] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 100
<4>[ 634.136083] mc_write:1--39
<1>[ 641.271927] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<1>[ 641.277631] [lcd_brightness]lcd turn off <--
<4>[ 641.283652] mc_write:1--0
<6>[ 641.292736] request_suspend_state: sleep (0->3) at 641722369336 (2013-03-0
6 14:02:06.859382668 UTC)
<4>[ 641.405636] -------------> do auto suspend
<3>[ 2132.167123] init: untracked pid 1061 exited
shell@android:/ $