logovacia obrazovka

hazard16

nainstaloval som si kubuntu 7.10 (uz druhykrat) a stale mam problem s logovacou obrazovkou.v grafickom rezime su udaje na logovacej obrazovke OBROVSKE, to znamena zenapis heslo a prihlasovacie meno su take velke ze sa mi nao brazovku zmestia asi tak zaciatocne pismena, a celkovo sa mi ten ramik, kde sa davaju prihlasovacie udaje zda byt rozhadzany, napriek tomu po zadani hesla system bezi dalej bez problemov aj v grafickom rezime.vedel by i niekto poradit??

dakujem

mailer

a po prihlaseny to je normalne,ak to robi stale hod sem
/etc/X11/xorg.conf

hazard16

mailer napísal:a po prihlaseny to je normalne,ak to robi stale hod sem
/etc/X11/xorg.conf

po prihlaseni bezi kubuntu v poriadku aj v grafickom rezime. len udaje na logovacej obrazovke su velkym fontom pisane.....neda sa to niekde upravit?

turtlak69

nemas nahodou notebook? mas nainstalovane ovladace?
mne to tiez robilo kadejake divociny kym som si nenahodil ovladace. potom to este chvilu blblo a potom v pohode

hazard16

turtlak69 napísal:nemas nahodou notebook? mas nainstalovane ovladace?
mne to tiez robilo kadejake divociny kym som si nenahodil ovladace. potom to este chvilu blblo a potom v pohode

heh, nahodou mam notebook, mam na nom dualboot s winom, ovladace mam instalnute, keby to robili ovladace tak by som mal problemy s KDE aj dalej, len problemy su len na logovacej obrazovke, okrem toho bezi vsetko v poriadku.

turtlak69

skus teda inu temu pouzit na tu logovaciu obrazovku. mozno pomoze. a tiez skus vyplut aj xorg.conf ako ti vyzera. mnohym to pomoze sa dostat dalej

hazard16

tak skusil som nahodit aj ubuntu a problem je podobny, tu je vypis xorg.conf

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
Option "XkbVariant" "qwerty"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

teraz ide vsetko v poriadku, az na to ze v logovacej obrazovke su zadavane udaje pisane velkym fontom, cize su necitatelne, ale inak na ubuntu vsetko ostatne tiez ide v poriadku

mailer

Kód: Vybrať všetko

SubSection "Display"
Modes "1280x800"

skus to nahradit za

Kód: Vybrať všetko

    SubSection     "Display"
        Depth       1
        Modes      "1280x800" "1024x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x800" "1024x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x800" "1024x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x800" "1024x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x800" "1024x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x800" "1024x768" "1024x768" "800x600" "640x480"

Cesar

Keď máš v xorg.conf podobný riadok:

Modes "1280x800" "1024x768" "1024x768" "800x600" "640x480"

a ty používaš nie to prvé ale druhé nastavenie, tak to väčšie rozlíšenie tam odstráň a potom už prihlasovacia obrazovaka nebude v tom obrovskom rozlíšení.