HTC WILDFIRE S
HTC WILDFIRE S
zdravím potreboval by som poradit ....rozbila sa my dotykova plocha ...tak som kupil novu a ta nereaguje ...chce to nakalibrovat ale neviem vobec ako na to ...help
-
guess.whoo
Redeemer
- Príspevky: 13616
- Registrovaný: 30 jan 2008, 12:58
- Bydlisko: VK,TN
- Kontaktovať používateľa:
Re: HTC WILDFIRE S
odkial si ju kupoval? a podla akeho navodu si ju vymienal?
Re: HTC WILDFIRE S
z ebay-u...podla netu ...ale je potrebne tu dotykovku nakalibrovat ale neviem ako
-
guess.whoo
Redeemer
- Príspevky: 13616
- Registrovaný: 30 jan 2008, 12:58
- Bydlisko: VK,TN
- Kontaktovať používateľa:
Re: HTC WILDFIRE S
a reaguje aspon nejako alebo vobec?
Re: HTC WILDFIRE S
reagoval...ale uplne od buka..nemozem odomknut klavesnicu
-
guess.whoo
Redeemer
- Príspevky: 13616
- Registrovaný: 30 jan 2008, 12:58
- Bydlisko: VK,TN
- Kontaktovať používateľa:
Re: HTC WILDFIRE S
no na kalibraciu sa musis dostat do menu hlavne, co sa asi nestane kedze ho nemozes odblokovat
-
bb5unlock
Light Professional
- Príspevky: 974
- Registrovaný: 01 feb 2009, 13:22
- Bydlisko: SR vs. CR
- Kontaktovať používateľa:
Re: HTC WILDFIRE S
existuju rozne revizie dotykovych sklicok
ak kupis inu reviziu ako si mal v telefone, tak musis kalibrovat
na kalibraciu musis mat spravenu GoldCard, bez nej to nejde
ak kupis inu reviziu ako si mal v telefone, tak musis kalibrovat
na kalibraciu musis mat spravenu GoldCard, bez nej to nejde
Re: HTC WILDFIRE S
a ako ju spravim ??...ked sa nemozem dostat do telefonu aby som mohol prepnut kartu ako diskovu jednotku ? ...
Re: HTC WILDFIRE S
taktiež rovnaký problém s tým, že ja sa po paru minutách dokážem dostať do menu... mohol by mi niekto poradiť ako nato?
ďakujem
ďakujem
-
Arkaz
Addict
- Príspevky: 4067
- Registrovaný: 09 nov 2008, 14:08
- Bydlisko: BA,Okolie
- Kontaktovať používateľa:
Re: HTC WILDFIRE S
Osobne som sa este nestretol s potrebou kalibracie digitizeru no nevylucujem to.Ja by som to videl na poskodenu dotykovku uz mi z ebay prislo par krat takto poskodene vyriesila to reklamacia a nasledna vymena 
-
bb5unlock
Light Professional
- Príspevky: 974
- Registrovaný: 01 feb 2009, 13:22
- Bydlisko: SR vs. CR
- Kontaktovať používateľa:
Re: HTC WILDFIRE S
tu je navod na vyrobu GOLDCARD + ako spravit kalibraciu
VYTVORENIE GOLDCARD
1. Please download the zip file named; "CalibrateWildfireS.zip" at the end of this page.
2. Unzip the file into a folder
3. Copy the files into the root of your memory card (Do not place them in a folder)
POSTUP PRE KALIBRACIU DOTYKU
4. Insert the memory card into your phone
5. Switch off the phone
6. With the phone switched off keep hold of the 'VOLUME DOWN' button and press the 'POWER' button once
7. Wait 10 seconds until screens displays "Get OEMSBL time out! ........... Press VOLDN to exit".
8. PRESS Volume Down button once
9. The screen will diplay "Vol-Dn=> DIAG" in red writing
10. PRESS Volume Down button once
11. At this point the digitizer will be calibrated. Let the process complete.
12. Once complete a screen will appear with the heading in blue "MAL SERVICE HDIAG 1.00"
13. You can now remove the battery and switch on the phone as normal and it should work fine.
NOTE:
- ALL PERSONAL DATA FROM PHONE MEMORY WILL BE ERASED.
- If the process is not working then the files have not been copied or the steps have not been followed correctly.
- This calibration software is ONLY for the HTC Wildfire S phone and will not work on anything else.
VYTVORENIE GOLDCARD
1. Please download the zip file named; "CalibrateWildfireS.zip" at the end of this page.
2. Unzip the file into a folder
3. Copy the files into the root of your memory card (Do not place them in a folder)
POSTUP PRE KALIBRACIU DOTYKU
4. Insert the memory card into your phone
5. Switch off the phone
6. With the phone switched off keep hold of the 'VOLUME DOWN' button and press the 'POWER' button once
7. Wait 10 seconds until screens displays "Get OEMSBL time out! ........... Press VOLDN to exit".
8. PRESS Volume Down button once
9. The screen will diplay "Vol-Dn=> DIAG" in red writing
10. PRESS Volume Down button once
11. At this point the digitizer will be calibrated. Let the process complete.
12. Once complete a screen will appear with the heading in blue "MAL SERVICE HDIAG 1.00"
13. You can now remove the battery and switch on the phone as normal and it should work fine.
NOTE:
- ALL PERSONAL DATA FROM PHONE MEMORY WILL BE ERASED.
- If the process is not working then the files have not been copied or the steps have not been followed correctly.
- This calibration software is ONLY for the HTC Wildfire S phone and will not work on anything else.
- Prílohy
-
- HTC MARVEL calibration by bb5unlock.zip
- GOLDCARD HTC WildfireS
- (312.91 KiB) 434 stiahnutí
